CUAV HV_PM Power Module | 10-60V — For pixhawk version* 2 Pcs

CUAV HV_PM Power Module | 10-60V — For pixhawk version* 2 Pcs

Selected package: For pixhawk version* 2 Pcs

Technical specifications refer to the base model. Package contents depend on the selected configuration; manufacturer images may show other bundles.

HV_PM 10-60V XT60 Power Module

Feature:

Hold more high input voltage: 10v-60v (3s ~ 14s battery)More accurate current and voltage detection: Voltage detection accuracy: + – 0.1v; Current detection accuracy: + – 0.2aASupport higher power port output current: 5AMaximum (detection) current: 60A

 Function:

Provide 5V voltage output and maximum 5A current to fly control power supplyDetection of the current voltage output analog signal to the flight controlDetection of the current system output analog signal to the flight controlBecause PIX flight control ADC maximum detection voltage of 3.3, so the maximum can only support 60A current detection.Its use is very simple, 6P signal line into the flight control POWER connector

Ground station settings:

Use USB or digital connection to the ground station Initial Setup >> Optional Hardware >> Battery Detector Select monitor: 4; Sensor 0; APM version 4; Fill in divider ratio 18; fill amperes per volt: 24 Manual calibration voltage: Because the PM module is an analog sensor device, there may be some differencesYou can calibrate the parameters for better accuracyPre-calibration preparation:1: Multimeter or BB ring (calibration voltage use)Calibration voltage steps:1: Use battery power, and connect to the ground station2: Use the multimeter or BB to measure the current battery voltage3: Select the sensor version is 0, in the measured battery voltage input current measured voltage filled into the box, click the mouse or click the TAB button, the ground station will automatically calculate a partial pressure ratio coefficient and automatically save the write Flight control4: The calibration is complete, no current calibration required.

Package Included:

voltage current *1,

Purchase Channels

Brochure Downloads

Technical documentation

Product Usage Scope and Limitations

Platform Compliance and End-User Commitment Statement

To jointly comply with international trade regulations and Chinese law, as a user purchasing products on this platform, you must understand and agree to abide by the following provisions:

Purchase and Use commitment

You commit that all products purchased through this platform will be used for legal and compliant civilian purposes. You shall not use the products for any military purposes, prohibited scenarios, or any activities related to weaponny or weapons of mass destruction.

Export and Resale Restrictions

1. Do not directly or indirectly export or transship products to any country/region subject to sanctions under Chinese law or international regulations.
2. Do not provide products to any entity or individual included in the restricted lists by international or domestic regulatory authorities.
3. If you resell products to downstream customers, you are obligated to ensure that they make compliance commitments consistent with the core terms of this statement.

Liability and Consequences of Breach

You fully understand that if you breach the aforementioned commitments(including false information, illegal use, illegal export, etc.), which results in any investigation, penalty, or loss (including financial compensation, damage to goodwill, etc.) to this platform, you shall bearfull compensation liability.
Meanwhile, the platform reserves the right to immediately suspend or terminate the provision of services to you and pursue your liability for breach of contractin accordance with the law.
The validity of this statement is independent and shall not become invalid by the completion of any transaction between you and the platform.