DroneStore — Drone & UAV components

9/9

Matek ASPD-DLVR Digital Airspeed Sensor

MTK-WDM-22998
Hover on image to enlarge
Out of stock
9.317,31 ₺ + VAT 11.180,97 ₺ VAT included Estimated deliveryUsually 9–25 calendar days
Ask a question

Minimum quantity for "Matek ASPD-DLVR Digital Airspeed Sensor" is 1.

50% deposit, 50% on delivery

Pay 50% of the product price as a deposit when placing your order. We source the product for you, and you pay the remaining 50% when you receive it.

Total including VAT
11.180,97 ₺
Deposit at order (50%)
5.590,49 ₺
Balance on delivery (50%)
5.590,48 ₺

This payment breakdown is based on the displayed price of one item.

Airspeed sensor for fixed-wing and VTOL applications. Check communication interfaces and connector compatibility.

Selected configuration: Matek ASPD-DLVR Digital Airspeed Sensor

DroneStore Benefits

No Full Payment Before Delivery

Pay 50% when ordering and the remaining 50% upon delivery.

Earn 1 TRY in Reward Points per 100 TRY

Earn reward points with your purchases.

Fast, Hassle-Free Shipping

Careful packaging and planned shipping. Estimated delivery: 9–25 calendar days.

Payment Options up to 9 Installments

Contact us for available payment options.

2-Year Warranty

We are here to support you after your purchase.

Sourcing Tailored to Your Needs

Contact us for the products and parts you need.

Description

Matek ASPD-DLVR Digital Airspeed Sensor

Airspeed sensor for fixed-wing and VTOL applications. Check communication interfaces and connector compatibility.

Selected configuration: Matek ASPD-DLVR Digital Airspeed Sensor

Package contents depend on the selected configuration. Shared gallery photographs may show other colors or packages.

Technical Specifications

CAN or I2C
ASPD-DLVR Flight Controller ASPD-DLVR Flight Controller
5V 5V 5V 5V
C-H CAN High SCL SCL
C-L CAN Low SDA SDA
G GND G GND
CAN_D1_PROTOCOL 1
CAN_P1_DRIVER 1 ARSPD_PIN 65
ARSPD_TYPE 8 (UAVCAN) ARSPD_TYPE 9 (I2C-DLVR-10in)
ARSPD_USE 1 ARSPD_USE 1
Mission Planner->
Initial Setup->
Optional Hardware->
UAVCAN->
MAVlink CANx ->
Parameters -> ARSPD_TYPE		 9  (DLVR-10in)

Write and reboot
GH-4P Pin Signal Wires color GH-4P Pin Signal Wires color
5V 4~6V input Red 5V 4.5~5.5V input Red
C-H CAN high Yellow SCL I2C-SCL Yellow
C-L CAN low Blue SDA I2C-SDA Blue
G GND Black G GND Black
T1 UART1-TX Tx1 UART1-TX bt Boot pin
R1 UART1-RX Rx1 UART1-RX 3 / 3v3 onboard LDO output
Tx2 UART2-TX Tx4 UART4-TX D SWDIO
Rx2 UART2-RX Rx4 UART4-RX G GND
Tx3 UART3-TX Tx5 UART5-TX C SWCLK
Rx3 UART3-RX Rx5 UART5-RX RST NRST
  • ArduPilot AP_Periph L431/F405/F303 CAN node
  • All sensors DLVR-L10D,  Industrial temperature range
  • CAN  & I2C Interface
  • Typical Platforms: Fixed-Wing, QuadPlane, VTOL
  • CAN JST-GH connector,  DroneCAN Protocol
  • I2C JST-GH connector,  DLVR-L10D I2C mode (I2C address 0x28)
  • F303 ver. (Black PCB)
    • UART1, Firmware update
    • UART2, Spare for external GPS
  • F405 ver. (Blue PCB)
    • UART1, Firmware update
    • UART4, Spare for external GPS
  • L431 ver. (Purple PCB)
    • UART2, Firmware update
    • UART3, Spare for external GPS
  • CAN bootloader LED, Blue
    • Fast blinking,  AP_Periph bootloader
    • Slow blinking, CAN Node ready
  • 3.3V Power LED, Red
  • Input voltage range: 4.5~5.5V
  • Power consumption: 60mA
  • Operating Temperatures: -20°C to 85°C
  • Pressure Range:  2500Pa (± 10 inH2O)
  • Burst Pressure: 75kPa
  • Speed Range: 227 km/h
  • 22mm*22mm*12.5mm(F303 ver.)
  • 23mm*23mm*12.5mm(F405 ver.)
  • 4g
  • 1x ASPD-DLVR
  • 2x JST-GH-4P to JST-GH-4P 20cm silicon wire
  • Pitot Tube
  • Clear silicon tubing  40cm
  • Firmware AP_Periph
  • DroneCAN protocol 
  • ArduPilot has removed DLVR I2C support by default on flight controller with 1MB flash MCU(such as F405, F745 series).
Features
Brand:
Matek
Find similar
Similar products